Philips WP3870 Manual Del Usuario página 43

1
2
1
2
4222.002.6965.3.indd 43
Note: If the Ultra Pure Protect lock has not been activated after 6 months of
use, Philips advises you to replace the filter anyway. This prevents deterioritation
of the taste of the purified water due to diminished effectiveness of the
activated carbon in the filter. The purified water is still pure, but a
deteriorated taste can reduce your pure water experience. If there are many
impurities in the water, the Ultra Pure Protect lock is activated before 2000
liters of water have been purified.
Note: Collect a few liters of water in a clean container before you replace the
filter, as the main water valve is closed during the replacement procedure. You
need this water to clean the filter holder.
1 Close the main water valve before you replace the filter.
2 Open the water reservoir tap and drain the water reservoir
completely.
3 Pull out the lock lever (1), lift the cover (2) and remove the water
reservoir from the wall holder.
4 Hold a cup under the spout to collect any water that may come
out of the filter holder during decompression and press the
decompression button. Keep the decompression button pressed until
no water or air comes out of the spout anymore.
5 To open the filter holder release lever, press the decompression
button with one hand (1) and pull the front part of the release lever
towards you with your other hand (2) .
6 Now you can lift the filter holder release lever.
English
43
26-02-09 08:23