Master Forge BG179A Manual Del Usuario página 64

OPERATING INSTRUCTIONS
Si le brûleur ne s'allume pas en moins de 5 secondes, tourner
If ignition does not take place within 5 seconds, immediately
immédiatement le bouton de commande à OFF. Attendre
turn the control knob to the OFF position. Wait 5 minutes and
repeat step 4 above or refer to match lighting instructions in
instructions d'allumage à l'allumette dans ce manuel.
manual.
If the igniter does not function, the burner can be lit by
en tenant une allumette près du brûleur alors que le bouton de
holding a lit match to the burner while the control knob is
commande est tourné en sens antihoraire à la position HIGH.
turned counter-clockwise to "HIGH."
NOTE: After the first use the stainless steel around the
burner will darken. This is a normal reaction of premium
stainless steel due to heat and is not a defect. The
infrared panel will also darken after initial use. This is
also a normal occurrence.
aussi normal.
UTILISER LES LUMIÈRES DU GRIL
USING THE GRILL LIGHT
Light Operation Instruction
1. S'assurer l'interrupteur d'alimentation des lumières sur le panneau de contrôle est à la position OFF.
1. Make sure light's power switch on the control panel is in the "OFF" position.
2. Connect power plug to properly grounded outlet.
3. Mettre l'interrupteur d'alimentation à la position ON.
3. Turn the light's power switch to "ON."
AVERTISSEMENT
WARNING
Keep any electrical supply cord away from any heated surface.
Do not turn on the lights when the hood is closed.
USING THE ROD EXTENDER
1. If the spit rod is too short for your grill, use the rod extender (II) included in the
l'emballage de votre gril.
packaging of your grill.
2. See Fig. 9 to assemble the rod extender.
3. Make sure the threaded end of spit rod screws securely into female end of the rod extender
to avoid loosening during cooking.
Fig. 9
Rotisserie Burner Control Knob
II
64
26