Master Forge BG179A Manual Del Usuario página 14

NATURAL GAS CONVERSION
12. Adjust the air shutters of main
burners and searing burner by loosening
the air shutter screws with the Phillips
screwdriver (DD).
Hardware Used
Phillips Head
DD
Screwdriver
13. Remove the LP orifices of all the
main burners and the searing burner
with the orifice removal tool (CC) and
install the 1.45mm orifices (FF).
Hardware Used
Orifice
CC
Removal Tool
1.45mm Orifice
FF
14. Remove the 6 screws at the back of
burner box with the Phillips head
screwdriver (DD). Detach the rotisserie
burner cover from the rear panel of burner
box.
During this step, keep a firm hold on the
rear burner cover. Otherwise, it will drop
and may break, possibly causing injury.
Hardware Used
Phillips Head
DD
Screwdriver
12
x 1
13
x 1
x 5
14
x 1
14
CC
FF
Rear Burner
Cover