Conversion Instruction - Master Forge BG179A Manual Del Usuario

NATURAL GAS CONVERSION

CONVERSION INSTRUCTION:

Before the conversion, make sure all control knobs are in the OFF position, LP tank valve is
closed, and tank is disconnected from regulator and removed from grill.
9. Before the conversion, make sure all
control knobs are in the OFF position, LP
tank valve is closed, and tank is
disconnected from regulator and
removed from grill.
Next, open lid and remove warming rack,
grids and flame tamer.
10. Remove the R-pins at the back of
each main burner to detach them from
the bracket. Take the main burners out.
11. Remove the screws attaching the
cover to the searing burner with the
Phillips head screwdriver (DD). Remove
the R-Pin at the back of the burner from
the bracket and loosen the ignition pin at
the same time. Lift the back of the burner
while sliding it out of the firebox.
Hardware Used
Phillips Head
DD
Screwdriver
9
10
11
x 1
13
Warming
Rack
Grids
Flame
Tamer
R Pin
Cover
R Pin
Ignition Pin