Removing The Insert - CYBEX ATON Manual Del Usuario

m
25
• that the car buckle q is not reaching all the way to the
blue belt slot m
• that the car belt is tight and not twisted
• that the Aton is vertically installed on the car seat (see
marking)
NoTE! the CyBex Aton is exclusively made for forward
facing car seats, which are equipped with a 3-point belt
system according to eCe R16.

REMoVING THE INSERT

the insert, which is preinstalled when purchased, helps
to support lying comfort and fit for the smallest babies.
in order to remove the insert please loosen the cover in
the baby seat, lift the insert a little bit and take it out of
the seat.
the insert may be removed after approx. 3 months to
provide more space.
the adjustable insert x (left picture top of page 33)
enhances the comfort of the child up to approx.
9 months. later the insert can be removed to give the
child additional space.