Product Care; Removing The Seat Cover; Removing The Seat Cover Of The Backrest - CYBEX SOLUTION X-FIX Manual De Instrucciones

PRODUCT CARE

In order to guarantee the best possible protection of your child seat, it is
necessary that you take note of the following:
• All important parts of the child seat should be examined for any damages on a
regular basis. The mechanical parts must function flawlessly.
• It is essential that the child safety car seat does not get jammed between hard
objects e.g. like the door of the car, seat rail etc. causing possible damage to
the seat.
• The child seat must be examined by the manufacturer after a fall or similar
situations.

REMOVING THE SEAT COVER

The seat cover consists of three parts which are fixed to the seat either by
velcros, press buttons or button holes. Once you have released all fixations, the
cover parts can be removed.
In order to put the covers back on the seat, proceed in the reversed order as
removing them.
Warning! The child seat must never be used without the cover.
REMOVING THE SEAT COVER FROM THE BACKREST
1. Pull the headrest (e) into top position, by using the release handle (h).
2. To release the headrest (e), simultaneously pull the handle (h) and the lower
rim of the upper rib of the backrest (a). Now the headrest (e) can be com-
pletely detached.
3. Now the cover can be removed.
4. For reassembly pull the adjustment handle (h) and insert the headrest (e) into
the backrest (a).
21