Working Area - ESAB Origo Feed 304 TRUCK Manual De Instrucciones

17
5) INSTALLING
5.1) Receiving the equipment
At receiving the Origo™ Feed 304 Truck wire feeders, remove all the packaging material around the unit and
check for possible damages that could have happened during transport. Any complaints related to
transport damage should be directed to the Transport Company.
Remove carefully any material that could obstruct the refrigeration air system.
N.B.: In case the feeder is not installed immediately, keep it in its original
packaging or store it in a dry and well ventilated place.

5.2) Working area

Several facts should be taken into consideration when determining the working place of a welding machine,
in order to have a safe and efficient operation. Adequate ventilation is needed for the refrigeration of the
equipment and for the operator's safety. It's extremely important that the area is kept clean.
The installation of any filter device in the environment restricts the air volume available for the machine
refrigeration which can cause overheating to the internal equipment. All guarantee undertakings from the
supplier cease to apply if the customer/user installs any filter device not authorized by the supplier.
NOTE: DO NOT USE THE NEUTRAL OF THE POWER SUPPLY SYSTEM
FOR GROUNDING.
All electrical connections must be firmly tightened to avoid sparkling risks,
overheating or circuit voltage drop.
24
Origo™ Feed 304 Truck