Evaluating Results - Beurer BM 85 Manual De Instrucciones

• Now select the desired user memory by pressing the
M1 or M2 memory buttons. If you do not select a user
memory, the measurement is stored in the most recently
used user memory. The relevant
on the display.
• Press the START/STOP button
blood pressure monitor. The measurement is then stored
in the selected user memory.
If Bluetooth data transfer has been activated, data
®
is transferred to the "beurer HealthManager"-app after
confirming the user memory (see chapter 8 "Transferring
measured values"). The blood pressure monitor shows the
Bluetooth symbol during data transfer. Press the START/
®
STOP button again to switch off the blood pressure
monitor.
Please note that you must add the blood pres-
sure monitor in "My devices" in the "beurer
HealthManager"-app to enable data transfers. The
"beurer HealthManager"-app must be active to allow
data transfers.
If the current data is not displayed on your smart-
phone, repeat the transfer as described in Chapter 8.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approximately 3 minutes. In
this case too, the value is stored in the selected or most
recent user memory and the data is transferred if Blue­
tooth ® data transfer has been activated. The Bluetooth
symbol appears on the blood pressure monitor display
during data transfer.
or symbol appears
to switch off the
®
30
• Wait for at least 1 minute before taking
another measurement.

6. Evaluating results

Cardiac arrhythmia:
This unit can identify potential disruptions of the heart rhythm
when measuring and if necessary, indicates this after the
measurement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is a condi-
tion in which the heart rhythm is abnormal because of flaws
in the bioelectrical system that regulates the heartbeat. The
symptoms (skipped or premature heart beats, pulse being slow
or too fast) can be caused by factors such as heart disease,
age, physical make-up, excess stimulants, stress or lack of
sleep. Arrhythmia can only be determined through an examina-
tion by your doctor.
If the symbol is shown on the display after the measure-
ment has been taken, it should be repeated. Please ensure that
you rest for 5 minutes beforehand and do not speak or move
during the measurement. If the symbol
ly, please consult your doctor.
Self-diagnosis and treatment based on the measurements can
be dangerous. Always follow your GP's instructions.
.
appears frequent-