Specifications - Sony STR-DE345 Manual De Instrucciones

Additional Information

Specifications

Amplifier section
Rated Power
Output at Stereo
Canada model:
Mode
(8 ohms 20 Hz - 20 kHz,
Australia, Singapore and
(8 ohms at 1 kHz, THD
Other countries:
(8 ohms at 1 kHz, THD
Reference Power
Canada model:
Output
(8 ohms at 1 kHz, THD
Front:
Center:
Rear:
Other countries:
(8 ohms at 1 kHz, THD
Front:
Center:
Rear:
Frequency TV/SAT, CD, MD/TAPE,
response
Inputs
Sensitivity
CD,
5.1 CH/
DVD,
150 mV
MD/TAPE,
TV/SAT,
VIDEO
20 US
Outputs
less than 0.09% total
harmonic distortion)
STR-DE345: 100 W + 100 W
Muting
Malaysia models: BASS BOOST
0.7%)
STR-DE345: 100 W + 100 W
TONE
STR-DE245: 50 W + 50 W
Tuner section
FM stereo, FM/AM superheterodyne tuner
0.7%)
STR-DE345: 100 W + 100 W
FM tuner section
STR-DE245: 50 W + 50 W
Tuning range
Antenna terminals
0.7%)
Intermediate
frequency
STR-DE345: 100 W/ch
Sensitivity
STR-DE345: 100 W
STR-DE345: 100 W/ch
Usable sensitivity
S/N
10%)
Harmonic
STR-DE345: 120 W/ch
distortion at
STR-DE245: 60 W/ch
1 kHz
STR-DE345: 120 W
Separation
STR-DE245: 60 W
Frequency
STR-DE345: 120 W/ch
response
STR-DE245: 60 W/ch
Selectivity
VIDEO, 5.1 CH/DVD:
+0.5
10 Hz - 50 kHz dB
–2
Impedance S/N
50
85 dB
kilohms
AM tuner section
MD/TAPE REC OUT:
Voltage: 150 mV,
Tuning range
Impedance: 10 kilohms
VIDEO AUDIO OUT:
Voltage: 150 mV,
Impedance: 10 kilohms
SUB WOOFER:
Voltage: 2 V
Impedance: 1 kilohms
PHONES: Accepts low
and high impedance
headphones
Full mute
+6 dB at 70 Hz
±6 dB at 100 Hz and
10 kHz
Antenna
Intermediate
frequency
Usable sensitivity
87.5 - 108.0 MHz
S/N
75 ohms, unbalanced
Harmonic
distortion
10.7 MHz
Selectivity
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
* You can change the AM tuning interval
between 9 kHz and 10 kHz. Turn off the
11.2 dBf, 1 µV (IHF)
receiver and press ?/1 (power) for more
than 4 seconds until "INITIAL" appears.
Mono: 76 dB
1) After tuning in any AM station, turn
Stereo: 70 dB
2) Hold down PRESET TUNING +
Mono: 0.3 %
Stereo: 0.5 %
To change to 10k Step, repeat step 1 and 2
45 dB at 1 kHz
until "10k STEP" appears. Note that all
+0.5
preset stations, index names and sound
30 Hz - 15 kHz dB
–2
field are cleared after you make the
procedure above.
60 dB at 400 kHz
Australia, Singapore and
Malaysia models:
531 - 1602 kHz (9 kHz
step)
Canada model:
530 - 1710 kHz (10 kHz
step)*
531 - 1710 kHz (9 kHz
step)
Other countries models:
530 - 1610 kHz (10 kHz
step)*
531 - 1602 kHz (9 kHz
step)
Loop antenna
450 kHz
50 dB/m (at 999 kHz)
54 dB (at 50 mV/m)
0.5 % (50 mV/m, 400 Hz)
At 9 kHz: 35 dB
At 10 kHz: 40 dB
off the receiver.
button and press the ?/1 (power)
button. "9k STEP" appears.