Operation And Handing; Before First Use; How To Use; Touch-Panel And Functions - CASO DESIGN B 3000 Touch Manual De Instrucciones Original

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

15.1 Before first use

Clean the device, see "cleaning".

15.2 How to use

15.2.1 Touch-panel and functions

► You can hear a signal tone when device has accepted the entry.
SPEED - / + adjust the speed
STOP – to stop the program
CLEAN – To choose the cleaning program. It runs on highest speed level.
START: Starts the chosen mixing process. The button is flashing. When the chosen time
has expired the button lights constantly. The device changes to default 30 seconds at
speed 3, this is shown on the display, all buttons are illuminated.
STOP: Stops the chosen program. The display turns to initial state and all buttons are
illuminated.
PAUSE: Suspends the chosen program, the PAUSE button flashes,
when you press PAUSE button again the program will be continued.
PULSE: As long as you press the PULSE button the device will work on highest speed
level. The button is flashing, all other buttons are illuminated. The pulse function is shown
in the display. You cannot use the pulse function with automatic mixing programs.
Caso B 3000 Touch
Warning
Please note
TIME - /+ - adjust the time
START– to start the program
41