Rating Plate; Operation And Handing; Before Initial Use; Use Of Jar / Mixing Vessel Or Blender Bottles - CASO DESIGN B300 VacuServe Manual Del Usuario

Place the jug with the lid and the blade base on the motor block in such a way that
placed above this symbol
symbol.
Or place the blender bottle with the lid and the blade base on the motor block in such a

way that is placed above this symbol
above the symbol.
Fill the blender attachment with the desired foods then attach the 2 blade bade and screw
it clockwise, place it on the motor block in such a way that
, screw it tight clockwise until

13.3 Rating plate

The rating plate with the connection and performance data can be found beneath the
device.

14 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

14.1 Before initial use

Clean the device as shown in cleaning and maintenance.

14.2 Use of jar / mixing vessel or blender bottles

1. Place jar or blender bottles with assembled blade base on a stable surface.
2. Add desired food into the jar / blender bottles.
3. Please note: The amount of filled food with drinking water shall not exceed the highest
marking. First fill the liquid and then the solid ingredients unless your recipe demands
otherwise.
4. Pay attention to the proportion of food to drinking water.
Food
250-300g
200-240g
100-130g
5. Close the jar with mounted blade base with the lid and place it on the motor block,
alternatively add the blender bottle with blade base on the motor block.
, screw it tight clockwise until

is positioned above the
Warning
Water
500-450g
360-400g
270-300g
, screw it tight clockwise until

capacity
750 ml (jar)
600 ml (big blender bottle)
400 ml (small blender bottle)

is positioned above the

is positioned
is placed above this symbol
symbol.

is
41