Overheating And Current Overload Protection; Cleaning And Maintenance; Safety Information - CASO DESIGN B 3000 Touch Manual De Instrucciones Original

Please note
► This device must not idle nor be overfilled, because the motor will overheat and gets
damaged.
► Do not leave the device unsupervised when it is in operation.
► Remove power plug first before pouring out the food.
For your own safety:
Never operate the device without the original lid that is part of delivery scope. In addition
do never put your hand into the blender jug during operation.

15.3 Overheating and current overload protection:

When the device was operating for longer time or was overloaded then the motor can
overheat and the overheating protection reacts. The device will stop automatically.
When the blades are blocked, the ingredients are too sticky, there is not enough liquid in
the jar or when the device was overloaded then the device can be overcharged. The
overload protection reacts. The device will stop automatically.
When the device has stopped automatically:
Pull the plug, then press reset button below the device. Plug in again, if device is working
normally you can go on, if not pull the plug again. Let the device cool down for at least 45
minutes. Now you can use the device again.
If you have any problem with this device, do not disassemble it by yourself. Always contact
the service department or after-sale service department.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

16.1 Safety information

Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the device, cord or plug in water or other liquids and do not place in the
dishwasher.
► The blades are really sharp. Handle them with care.
► Please observe that the bottom of the jar do not has any contact with moisture.
Caso B 3000 Touch
With program soup, depending on the mix-level, the food will be heated up
to 60° - 80 °C due to friction.
Please note
Warning
Attention
44