Input Characteristics - Rigol DG1000Z Serie Manual De Uso

Chapter 5 Specifications
Trigger Source
Trigger Delay
Sweep Characteristics
Carrier Waveform
Type
Direction
Start/Stop Frequency
Sweep Time
Hold/Return Time
Trigger Source
Mark
Counter
Function
Frequency Resolution
Frequency Range
Period Measurement
Voltage Range and Sensitivity (Not modulation signal)
DC Coupling
AC Coupling
pulse Width and Duty Cycle Measurement
Frequency/Amplitude
Range
pulse Width
Duty Cycle

Input Characteristics

Input Signal Range
Input Adjustment
Input Trigger
DG1000Z User's Guide
Internal, External or Manual
0ns to 100s
Sine, Square, Ramp, Arb (except DC)
Linear, Log or Step
Up/Down
Consistent with the upper/lower limit of the frequency of
the carrier waveform
1ms to 500s
0ms to 500s
Internal, External or Manual
Falling edge of the Sync signal (programmable)
Frequency, Period, Positive/Negative pulse Width, Duty
Cycle
7 digits/second (Gate Time =1s)
1μHz to 200MHz
Measurement Range 5ns to 16 days
DC Offset Range
1μHz to 100MHz
100MHz to 200MHz
1μHz to 100MHz
100MHz to 200MHz
1μHz to 25MHz
Minimum
Resolution
Range (Display)
Breakdown Voltage
Coupling
HF Suppulseion
Trigger Level Range
±1.5Vdc
50mVRMS to ±2.5Vac+dc
100mVRMS to ±2.5Vac+dc
50mVRMS to ±2.5Vpp
100mVRMS to ±2.5Vpp
50mVRMS to
±2.5Vac+dc
≥20ns
5ns
0% to 100%
±7Vac+dc
AC
ON: input bandwidth=250kHz;
OFF: input bandwidth=200MHz
-2.5V to +2.5V
RIGOL
DC Coupling
Impedance=
1MΩ
DC
5-5