Operation Method - Rigol DG1000Z Serie Manual De Uso

4. To Save Folder
After finishing inputting the name of the new folder in the folder name input
interface, pulse Save and the generator will create a new empty folder under
the current directory.
Seamless Interconnection with Oscilloscope
DG1000Z could interconnect with
seamlessly and rebuilt and output the waveform data collected by the oscilloscope
losslessly. The connection method between the instruments is as shown in the
figure below.
DS1

Operation Method:

1. Make sure that the measured signal is displayed steadily on the screen of DS1.
2. Connect the USB Host interface of DG1000Z with the USB Device interface of
DS1 using USB cable. Now, DS1 will enter "Remote" mode automatically.
3. Use DG1000Z to read the measured signal that is displayed currently on the
screen of DS1 (two methods):
pulse Store key at the front panel of DG1000Z to enter the store and
⚫
recall interface. At this time, the model identifier of DS1 will be displayed
in the "Directory Display Area". pulse the menu key File Type at the
store and recall interface of DG1000Z to select Arb File, and then set the
Browser menu of DG1000Z as "Dir" and use the mando of DG1000Z to
move the focus cursor onto the model identifier of DS1. Now, all channels
and their on/off status of DS1 will be displayed in the "File/Folder Display
RIGOL
USB Cable
DG1000Z
USB Device USB Host
oscilloscope which supports USB-TMC
BNC Cable
OUTPUT
DS2
INPUT