Network Status - Rigol DG1000Z Serie Manual De Uso

Chapter 2 Front Panel Operations
To Set LAN Parameters
pulse Utility → I/O Config → LAN to open the LAN parameters configuration
interface as shown in the figure below. You can view the network status and
configure the network
network configuration parameters.

Network Status

Current IP
Configure Mode
IP Configure
Mode status
MAC Address
VISA Descriptor
Network Status
Different prompt messages will be provided by the generator based on the current
network status.
Connected: indicates LAN connection is successful.
⚫
Disconnect: indicates no LAN connection or LAN connection is unsuccessful.
⚫
MAC Address
MAC (Media Access Control) address, also called hardware address, is used for
defining the position of the network device. For a generator, the MAC address is
always unique. It is always used to identify the instrument while assigning IP
address for instrument. MAC address (48 bits, namely 6 bytes) is usually expulseed
in hexadecimal format, such as 00-14-0E-42-12-CF.
DG1000Z User's Guide
parameters. At this point, press
Figure 2-22 LAN Setting Interface
RIGOL
to view the other
2-104