Chapter 5 Specifications
Jitter (rms)
Edit Method
Harmonic
Harmonic Order
Harmonic Type
Harmonic Amplitude
Harmonic Phase
Output Characteristics
Amplitude (into 50 Ω)
Range
Accuracy
Flatness
Units
Resolution
Offset (into 50 Ω)
Range (Peak ac+dc)
Accuracy
Waveform Output
Impedance
Protection
Modulation Characteristics
Modulation Type
AM
Carrier Waveform
Source
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Depth
Modulating Frequency 2mHz to 1MHz
FM
Carrier Waveform
Source
DG1000Z User's Guide
Typical (1Vpp)
≤5MHz: 2ppm+200ps
>5MHz: 200ps
Edit Points, Edit Block, Insert Waveform
≤8
Even, Odd, All, User
can be set for all harmonics
can be set for all harmonics
≤10MHz: 1.0mVpp to 10Vpp
≤30MHz: 1.0mVpp to 5.0Vpp
≤60MHz: 1.0mVpp to 2.5Vpp
Typical (1kHz Sine, 0V Offset, >10mVpp, Auto)
±1% of setting ± 1mV
Typical (Sine 2.5Vpp)
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
Vpp, Vrms, dBm
0.1mVpp or 4digits
±5Vpk ac+dc
±(1% of setting+5mV+0.5% of amplitude)
50Ω (typical)
Short-circuit protection, automatically disable waveform
output when overload occurs
AM, FM, PM, ASK, FSK, PSK, PWM
Sine, Square, Ramp, Arb (except DC)
Internal/External
0% to 120%
Sine, Square, Ramp, Arb (except DC)
Internal/External
RIGOL
5-3