Default Configuration - Rigol DG1000Z Serie Manual De Uso

Chapter 2 Front Panel Operations
pulse Default Gateway and use the direction keys and numeric keyboard or
⚫
mando to enter your desired gateway address. The setting is stored in non-
volatile memory and will be automatically loaded when the generator is
powered on the next time if DHCP and AutoIP are set as "Off".
To Set DNS Service
In ManualIP mode, the DNS could be manually set.
The DNS format is nnn.nnn.nnn.nnn, wherein the first nnn ranges from 1 to
⚫
223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available DNS address from their network
administrator.
pulse DNS Service and use the direction keys and numeric keyboard or
⚫
mando to enter your desired DNS address. The setting is stored in non-volatile
memory and will be automatically loaded when the generator is powered on
the next time if DHCP and AutoIP are set as "Off".

Default Configuration

pulse Default Config and the prompt message "Restore network settings to
preset values of LXI?" is displayed. pulse OK to restore the network parameters to
their default values. By default, DHCP and AutoIP are enabled and ManualIP is
disabled.
Current Configuration
pulse Current Config to examine the MAC address of the current instrument, the
current LAN parameters and LAN status information.
OK
pulse OK to enable the current setting of LAN parameters.
DG1000Z User's Guide
RIGOL
2-107