Chapter 2 Front Panel Operations
Print Set
Users could store the contents displayed on the screen into external USB storage
device in picture format.
1.
Insert a USB storage device into the USB Host interface on the front panel.
2.
pulse Utility → Print Set → Format to select "BMP" or "PNG".
3.
pulse Utility → Print Set → Print → "On" to enable the print function.
4.
Switch the content displayed on the screen to the interface to be printed.
pulse the key . at the front panel twice continuously and the contents
displayed on the screen will be stored into the USB storage device in picture
format according to the preset configuration. During the store process, the
print progress bar is diaplayed on the screen.
Test/Calibration
Pulse Utility → Test Cal to view calibration state and calibration time.
Besides, pulse Utility → Test Cal → Manual Cal to input correct calibration
password and pulse Ok to enter the manual calibration interface. At this time, you
can calibrate the instrument manually. A default password is set when factory
delivery and please contact
have already known the password, you could modify the password (pulse
Password Modify and modify the password according to the interface prompts).
NOTE:
DG1000Z User's Guide
if you want to acquire this password. If you
RIGOL
RIGOL
2-108