Operation And Function; Lux, Time Knobs - koban KDP3 360 Manual De Usuario

KDP3 360
Presence detector
• Refer to wiring diagrams for correct wiring connection (See FIG.5 - FIG.10).
There is a square hole in the fixing plate, when you put the fixing plate into
the junction box, please fit the fillister to the junction box's protrusion
(See FIG.21), then fix the detector head on the power box following FIG.11
and assemble them with the attached 4pcs nondropping screws.
Protrusion
Square
hole
• Cover up the detector's decorative frame and restore the power supply.

Operation and function

Lux, Time knobs

Knob
Set the light value
for switching on
load
Set delay off time
for lighting
Instructions manual |
FIG.21
Function
Range: Approx. 10 to 2000Lux
User can set the knob according to
their requirement for application. The
marked values are for reference only.
Range: Approx. 10sec to 30min
Test : Test mode (Load and red LED
will be 2sec on, 2sec off)
timer switch control (Load will be 1sec
on, 9sec off)
32
Non-dropping
screw
Knob setting
: Short impulse mode for staircase
www.grupotemper.com