23.4.2. Establishing a WPS connection
You can establish a WPS connection under PBC WLAN SETUP:
Activate the WPS connection on the device, which supports WPS and then con-
firm the connection on the internet radio and press SELECT to confirm.
23.4.3. Displaying settings
Information about the currently connected network and the device's MAC address is
displayed under EINSTELLUNGEN ANZEIGEN.
23.4.4. Selecting a WLAN region
Select the region, in which you are using the device under WLAN-REGION.
23.4.5. Manual settings
Under MANUELLE EINSTELLUNGEN, select cable connection (Ethernet) or
wireless connection (WLAN) and set the DHCP function to EIN or AUS.
23.4.6. Changing the NetRemote PIN
Under NETREMOTE PIN-SETUP, you can re-assign the four-digit number en-
tered when establishing a connection with the Lifestream 2 app on a smartphone
or tablet PC.
23.4.7. Deleting a network profile
The device stores the last 4 WLAN networks that have been connected.
Under NETZWERKPROFIL, select a network and press SELECT to confirm.
Press JA to confirm the subsequent prompt and delete the network from the
list.
The currently connected network cannot be deleted.
23.4.8. Deleting network settings
Select JA to delete all network settings.
23.4.9. Maintaining a network connection in standby mode
Select NETZWERKVERBINDUNG BEIBEHALTEN and set the function to
JA if the internet radio is to remain connected to the network even when in
standby mode or in an operating mode that does not use WLAN (AUX IN, FM ra-
dio, DAB radio). This enables other media players to access the internet radio and
"wake it up".
DE
FR
NL
ES
IT
EN
311