Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Overview of the LED indicators on
the charger (3):
Green LED (5) lights up with-
out battery inserted:
Charger ready.
Green LED (5) lights up:
Battery such alleged
charged.
Red LED (4) lights up:
Battery charging.
Operation
Wear breathing protection
(fine dust mask of protection class
FFP2).
Do not wear gloves while milling.
Switching on and off
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the device on,
ensure it is not in contact with the
workpiece.
1. Ensure that the battery (1) is inserted
(see „Removing/inserting the battery").
2. Switching on: Slide the on/off switch
(18) upwards so that "I" appears on
the switch.
3. Switching off: Slide the on/off switch
(18) downwards so that "0" appears
on the switch.
Practical tips
Milling
Always mill in counter direction: in
the process, the machine is moved
counter to the rotation direction of
the cutter.
(a)
Never mill in the rotation di-
rection (synchronous opera-
tion). There is the risk of ac-
cidents, as the machine might
be torn out of your hands.
• Use only the cutter that has a specified
permissible rotation speed, which is at
least as high as the maximum rotation
speed of the machine that is specified
on the machine.
• Always use the proper tools.
• Do not use any blunt or damaged tools
or accessories.
• Be aware that the cutter will protrude
from the bottom of the baseplate. Ensure
you do not damage your workpiece or
other objects as a result.
1. Fasten the workpiece securely on
the work surface.
2. Insert the cutter.
3. Set the desired cutting depth.
4. Turn the device on.
5. Move the device to the location
you wish to work on.
GB
MT
(b)
53
Capítulos
Tabla de contenido
