Approvals Compliance And Exemptions; Approvals; Compliance; Exemptions - Parker PNEUDRI MXLE ADVANTAGE Serie Manual De Uso

2.4 Approvals Compliance and Exemptions

2.4.1 Approvals

Safety and Electromagnetic Compatibility
This equipment has been tested and complies with the following European Standards:
BS EN 60204-1:2006 (Including: Amendment1:2009) - Safety of machinery. Electrical equipment
of machines. General requirements.
EN61326: 2006 - Electrical Equipment for Measurement, Control, and Laboratory use, EMC
Requirements.
EN 55011:2009 (Including: Amendment1:2010) - Industrial, scientific and medical equipment.
Radio-frequency disturbance characteristics. Limits and methods of measurement.
Generally in accordance with ASMEVIII Div 1 : 2010 + 2011a Addenda.

2.4.2 Compliance

OIL-X EVOLUTION filters & PNEUDRI MXLE Dryers are ideally suited for use in the food,
beverage & pharmaceutical industries as the materials used in the construction of these product
ranges have been independently verified to comply with FDA Code of Federal Regulations, Title 21
'Food and Drug'.
3rd Party Performance Verification
OIL-X EVOLUTION Coalescing Filters tested in accordance with ISO12500-1 & ISO8573-4
OIL-X EVOLUTION Dry Particulate Filters tested in accordance with ISO8573-4
PNEUDRI MXLE Dryers tested in accordance with ISO7183
All performance validation independently verified by Lloyds Register

2.4.3 Exemptions

OIL-X EVOLUTION filters & PNEUDRI MXLE Dryers are ideally suited for use in the food,
beverage & pharmaceutical industries as these product ranges are not included within the scope of
European Regulation (EC) number 1935/2004 on materials and articles intended to come into
contact with food and are therefore not required to comply with the regulation.

2.5 Materials of Construction

Silencer Baffle and End Cap
Columns, Manifolds and Valve Blocks
Manifold and Purge End Plates
Inlet, Outlet and Exhaust Valve Block End Plates
Inlet and Exhaust Cylinders
Dryer Feet
Rear Mounting Plate
Coalescing Filter
Hygrometer Housing
Control Box
Fittings
Pressure Gauge
Adsorbant
Seal Materials
Paint
Aluminium
Aluminium Extrusion EN AW-6063 T6
Cast Machined EN AW-6082 T6
Cast Machined EN AC-44100-F
Aluminium Alloy
8MM Steel Plate
14SWG Mild Steel
Aluminium Housing
GR316 – BS970
16SWG Mild Steel
Nickel Plated Brass and Nickle Plated Mild Steel
ABS Plastic casing and dial, brass connector and movement
Activated Alumina and 13X MS
Nitrile, Viton, EPDM, PTFE (tape)
Epoxy coated
APPROVALS, ACCREDITATIONS AND
ASSOCIATIONS
INTERNATIONAL APPROVALS
7