Before Daily Use; Water Temperature - Philips WP3812 Manual Del Usuario

Before daily use

- To prevent quick clogging of the filter cartridge, let the water run at
the unfiltered setting for around 5 seconds before every use.
- If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the filtered setting until the
water is clear.
- Let the water run at the filtered setting for 10 seconds before use
each day.
- Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
- If you have not used the water purifier for more than two weeks, let
the water run at the filtered setting for 2-3 minutes before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.

Water temperature

- Do not let water hotter than 50°C run through the water purifier,
because this may damage the appliance.
- Do not let the water purifier freeze.
applications
- Only use the appliance to filter water that meets drinking water
standards at the point of use.
- Do not block the filtered water outlet or connect other devices to it.
- If the water pressure is very high, reduce the water flow of the tap to
prevent damage to the cartridge.
- Keep the water purifier away from heat to avoid distortion or
breakage.
- Do not tamper with the water purifier.
- Do not remove the filter cartridge while you use the water purifier.
- Do not use the water purifier without a filter cartridge.
- Do not place the appliance near a window where it is exposed to
direct sunlight.
- This appliance does not soften water.
- Do not use filtered water in aquariums. Tap water, filtered or
unfiltered, can be harmful to fish.
English