Introduction; Intended Use; Features; Package Contents - Parkside PFS 710 D3 Traducción Del Manual De Instrucciones Original

SABRE SAW PFS 710 D3

Introduction

Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as described
and for the range of applications specified . Please
also pass these operating instructions on to any
future owner .

Intended use

This appliance is designed for sawing, cutting to
length and adapting wood, plastics and construc-
tion materials . The sabre saw is suitable for rough
sawing work, straight and curved cuts and cuts off
surfaces flush . Heed the information concerning
saw blades and practical advice on sawing . Any
other uses of or modifications to the machine are
deemed to be improper usage and may result in
serious physical injury . The manufacturer accepts
no responsibility for damage(s) attributable to
misuse . This appliance is not intended for commer-
cial use .

Features

Stroke rate adjusting wheel
Locking switch
ON/OFF switch
Handle
Footplate
Saw blade
Quick-release chuck
Work light
Locking lever for footplate
Cover for carbon brushes
Release button
Saw blade for wood
Bimetal saw blade
■ 34 │ GB │ MT

Package contents

1 sabre saw PFS 710 D3
1 saw blade for wood HCS 152 mm
(SWISS MADE)
1 bimetal saw blade 152 mm
(SWISS MADE)
1 set of operating instructions

Technical data

Rated voltage
Rated power consumption
Rated idle speed
Stroke length
Max . cutting performance
Sawblade mounting
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Total vibration value
Cutting boards
Uncertainty
Cutting wooden beams
Uncertainty
230 V ∼, 50 Hz (AC)
710 W
n 0 – 2800 rpm
0
20 mm
Wood 160 mm
Aluminium 18 mm
Metal 8 mm
½" (12 .7 mm)
II /
(double insulation)
L = 88 dB(A)
PA
K = 5 dB
L = 99 dB(A)
WA
K = 5 dB
a = 9 .8 m/s
2
h,B
K = 1 .5 m/s
2
a = 12 .1 m/s
2
h,WB
K = 1 .5 m/s
2
PFS 710 D3