Introduction; Intended Use; Features; Package Contents - Parkside PMB 1100 A1 Traducción Del Manual De Instrucciones Original

METAL CUTTING BANDSAW
PMB 1100 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product.
The operating instructions are a part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all of the operating
and safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.

Intended use

The appliance is primarily intended for sawing
metal pipes or profiles.
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The appliance should not be used for industrial
purposes.

Features

Light switch
Speed setting wheel
On/Off switch
Workpiece stop
Workpiece stop screws
Small hex key
Saw blade
Saw blade clamping lever
Figure A:
Handle
Wing screw on handle
Protective covers
Locking screws
Figure B:
Rubber wheels
Guide rollers
│ GB │ MT
■ 38
Figure C:
Handle on the vice
Quick release
15a
Vice
Short wing screws
Figure D:
Cutting angle adjustment
Long wing screw
Screw for the cutting angle adjustment
Locking pin
Swivel arm
Figure E:
Work lamp
Saw table

Package contents

1 metal cutting bandsaw
1 saw table
4 large wing screws
4 small wing screws
1 hex key (small)
1 hex key (large)
1 set of operating instructions
Technical specifications
Rated voltage:
Rated power
consumption:
Cutting width at 90°:
Cutting width at 45°:
Rated idle speed:
Saw band speed:
Inclined cuts:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the power
tool is typically:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
230 V ∼, 50 Hz
(AC)
1100 W
127 mm x 127 mm
(without saw table)
127 mm x 40 mm
(without saw table)
n 0–290 rpm
0
0–2.4 m/s
0°–45°
II / (double insulation)
L = 90.7 dB (A)
PA
K = 3 dB
PA
L = 101.7 dB (A)
WA
K = 3 dB
WA
PMB 1100 A1