Technical Specifications; Putting The Machine Into Service - Grillo FD 1500 2WD Uso Y Mantenimiento

MODEL: hydrostatic tractor mower with front deck.
ENGINE: Kubota V1505, diesel 1498 c.c. (34 HP) 4 cylinders, radiator cooling, provided with automatic device
for radiator cleaning.
FUEL TANK: 40 lt. – HYDAULIC OIL TANK: 35 lt.
HOURLY CONSUMTION: 6.5 lt.
STARTER: electric 12V.
TRACTION: hydraulic, 2 drive wheels.
DIFFERENTIAL LOCKING WITH PUSH BUTTON
GEARBOX: hydrostatic transmission with 2 hydraulic engines on 2 front wheels.
STEERING SYSTEM: hydraulic drive with steering wheel.
CLUTCH: electromagnetic for PTO, with magnetic blade brake.
SPEED: from 0 to 20 Km/h continously variable (double speed range: 0-11 / 0-20).
WHEELS: front 23 x 10.50-12; rear 18 x8.50-8.
MOTORISED BAFFLE PROVIDING FULL AND EVEN GRASS CATCHER FILLING.
GRASS CATCHER: 900 lt.
DISCHARGE HEIGHT: 210 cm – REAR PROJECTION: 500 mm.
TURBINE: Ø 40 cm with hydraulic engine provided with a safety valve avoiding damages due to foreign
objects, independent deck activation.
AUTOMATIC FEATURES: automatic disengagement of blades, when the grass catcher is full.
BRAKE: hydraulic service and parking brake.
HYDRAULIC DECK LIFT AND BASKET EMPTYING.
SEAT: super comfort adjustable and sprung seat with arm-rests.
STEERING WHEEL: fixed on steering column with height and tilt adjustment.
STEERING RADIUS: 36 cm.
ACCESSORIES: cutting deck with grass catcher 155 cm with anti-shock discs, weight 180 Kg.
HOURLY MOWING CAPACITY: 11,500 m
SIZE (with cutting deck):
LENGTH: 3,420 mm – WIDTH: 1,620 mm – HEIGHT: 1,790 mm.
SIZE (without cutting deck): LENGTH: 2,500 mm – WIDTH: 1,320 mm.
CLEAR SPAN FROM THE GROUND: 170 mm.
DISTANCE BETWEEN AXLES: 1,260 mm.
WEIGHT : 1,100 Kg.

PUTTING THE MACHINE INTO SERVICE

1) Make sure the machine is complete and that it has not suffered any damage during transit.
2) Check the levels of the engine oil (fig. 3), hydrostatic transmission (fig. 4).
3) Check the tyre pressures:
Front wheels 23 x 10.50 - 12 (1.4 BAR)
Rear wheels 18 x 8.50 - 8 (2 BAR)
Deck wheels (1,5 BAR)
4) Check the battery voltage, it must not be less than 12 Volts; recharge if necessary.
If a dry battery has been supplied with separate acid, to put the machine into service proceed as follows:
1) pour in the acid and wait 2 hours;
2) charge the battery with a charger set to 12 Volts on a slow charge for 2 hours.
Caution, if this procedure is not observed this could lead to the battery deteriorating and the acid leaking out
during work.
BATTERY – CAUTION!
The gas released by the battery is explosive, so keep it away from naked flames or sparks. Check the level of the
liquid at regular intervals and keep the terminals greased with Vaseline.
IMPORTANT!
- Do not invert the battery poles.
- Do not run the lawnmower without the battery, as it is equipped with a charge regulator.
- Be careful not to cause any short circuits.

TECHNICAL SPECIFICATIONS

2
/h.
14