Installation - Tecno-gaz ONYX B 7.0 Manual Tecnico

ENGLISH
04
 Install the autoclave in environments suitable for sterilisation.
 The device must not be used in potentially explosive atmospheres.
 The device must be installed away from devices generating strong emissions of heat
and electromagnetic radiations that may damage the installed electronics.
 The room must be adequately lit and ventilated.
 Install the autoclave away from sources of heat and water splashes.
 The autoclave is supported by a wooden pallet and enclosed in corrugated
cardboard, reinforced internally with cardboard compounds. To unpack the
autoclave, open the corrugated cardboard, remove the reinforcement parts and
remove it using the straps provided. The unit must necessarily be handled by two
people, using the straps. Never lift the autoclave by the lower part of the door or of
the control panel. This incorrect operation could damage the unit.

INSTALLATION

13