Controller Overview; Adjusting The Temperature - Mitsubishi Electric RedLINK MHK2 Manual De Operación

Controller Overview

Desired Indoor
Temperature Temperature/
Relative Indoor
Shows desired
indoor temperature. Humidity (%)
Touch to display
either indoor
temperature or
relative indoor
humidity (%).
Vane Mode
Touch to select air Touch to select
direction (options system mode:
may be vary for • Heat
different head • Cool
units): • Dry
• Auto • Fan
• Swing • Auto
• Ceiling • Off
• High
• Middle
• Low
• Floor

Adjusting the Temperature

To adjust the desired temperature up or down,
touch or on the controller home screen.
How long the change will be held depends on what
schedule type is selected. For more information,
see "Scheduling Options" on page 10.
33-00447EFS_B.indd 4
RedLINK™
Connection Status
Indicates if the
controller is
connected to the
RedLINK™ interface
and communicating
correctly.
72
Heat Heat
Auto
Vane Vane Mode Mode Menu Menu Fan Fan
Lock
Indicates the
screen is locked:
• Full Lock
• Partial Lock
• ISU-based locks
(Full and Partial
Locks can be
unlocked with a
PIN.)
4
Connection Status Adjust
Information Temperature
Indicates if the Touch
set your desired
MIFH2 RedLINK™
temperature.
Wireless Receiver
is connected to the
Mitsubishi Electric
Wireless Interface 2
and kumo cloud .
®
Menu Fan
Touch to program a Touch to select fan
schedule and see mode:
other customizable • Auto
options. • Adjustable
Heat
Leave Return
Vane
or to
speeds 1-5
Auto
10/17/2019 3:22:51 PM