Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Figure 41: Processor Board Identification
Typical Processor Board, Rev G
.
How to Identify the Software Version
4.1.2.
Software WUMTCOMB with version numbers 40049B and later allows you to configure serial
communications through either Port 1 or Port 3. See
version. Refer to
Table 6
Figure 42: Software Version Display
How to Connect the Serial Link
4.1.3.
For "REV G" or later processor boards with software WUMTCOMB/40049B or later can be
configured to use Port 1 for enhanced noise immunity. To take advantage of this improvement,
the processor board and controller software must meet the version requirements, and the serial
link must be connected to Port 1, as identified in
for compatibility.
Figure
55
Chapter 4. Additional Information
Typical Processor Board BEFORE Rev G
Figure 42
for where to identify the software
43.
PELLERIN MILNOR CORPORATION
Tabla de contenido
