Milnor MilTouch-EX 48040H7K Guía Del Operario página 38

El control de la lavadora extractora
Ocultar thumbs Ver también para MilTouch-EX 48040H7K:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Chapter 2. How to Configure and Program the Control
Steam
2.2.8.
Figure 28: Steam window
Display
.
A. NO Steam—Do not use steam in this step to achieve or to restore the bath temperature.
B. After, Runs—After the desired bath level is achieved, run the step timer, and use steam to
achieve and to maintain the bath temperature.
C. Stops—After the desired bath level is achieved, use steam to achieve the bath temperature
with the step timer stopped. Do not use steam to maintain the temperature.
D. After, Stops—After the desired bath level is achieved, use steam to achieve the bath
temperature with the step timer stopped. If necessary, use steam to maintain the temperature.
E. Early, After, Runs—At the lowest safe bath level, use steam to achieve the bath temperature.
Start the step timer when the desired level is achieved. If necessary, use steam to maintain the
temperature.
F. Early, Stops—At the lowest safe bath level, use steam to achieve the bath temperature. Start
the step timer when the desired level and temperature are achieved. Do not use steam to
maintain the temperature.
G. Early, After, Stops—At the lowest safe bath level, use steam to achieve the bath temperature.
Start the step timer when the desired level and temperature are achieved. If necessary, use
steam to maintain the temperature.
Chemical
2.2.9.
Chemical Number (e.g., 001)—The fixed display of the chemical number.
ON/OFF—Is this chemical used in this step?
Chemical Name (e.g., Chemical 01)—Chemical name, as programmed elsewhere.
When to Inject—Choose the "With Fill" option to start the chemical injection when the water
valves open to fill the cylinder. Choose the "Level OK" option to start the chemical injection
when the water level in the cylinder is achived. Choose the "Level + Temp" option to start the
chemical injection when the water level in the cylinder is achieved and the desired
temperature is achieved.
PELLERIN MILNOR CORPORATION
Legend
A.
NO Steam
B.
After, Runs
C.
Stops
D.
After, Stops
E.
Early, After, Runs
F.
Early, Stops
G.
Early, After, Stops
34
Tabla de contenido
loading

Tabla de contenido