Displaying Stored Results - Dräger CMS Instrucciones De Uso

Operation
7.10

Displaying stored results

The stored results are read in the Setup menu.
1. Move sliding switch from position 0 to
position 1. Then immediately press and
hold side button until the following
display appears:
Setup CMS
Read DataRec
2. Press and hold side button until the
following messages
alternately:
All stored results are displayed consecutively. The storage locations are occupied in numerical
order of the measurement (sorted according to date and time).
Display other stored results:
1. Briefly press side button until the required data are displayed.
Results which have been saved in "Auto" storage mode are displayed with an asterisk (*). The
location code is not used in "Auto" storage mode.
Return to Setup:
2. Press and hold side button until the following display appears:
Setup CMS
Read DataRec
The other Setup options and the DataRecorder Read and Delete functions can be selected by
repeatedly pressing the side button.
Exit Setup mode:
3. Move sliding switch to position 0.
56
are displayed
Setup CMS
Read Data Rec
0 0
1 1
2 2
3 3
NH3
5.5 ppm B05
07.01.97 08 : 06
5.5 ppm B05
Dräger CMS Analyzer
01222837.eps
04322837_4en.eps