Preparations At The Workplace; Charging The Battery; Inserting The Battery - Hilti SFE 2-A12 Manual De Instrucciones Original

Drill-bit diameter
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.

5.2 Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
10 English
Printed: 07.08.2019 | Doc-Nr: PUB / 5507951 / 000 / 00
Hardwood
Metal
2236949
1.5 mm ... 10 mm
(0.06 in ... 0.4 in)
1.5 mm ... 6 mm
(0.06 in ... 0.2 in)
10.8 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
4 ℃ ... 40 ℃
(39 ℉ ... 104 ℉)
*2236949*