Verification Upon Reception; Reception Protocol; Transport And Handling - Circutor SVGm IP54 Manual De Instrucciones

1.- VERIFICATION UPON RECEPTION

1.1.- RECEPTION PROTOCOL

Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
e) Perform an external and internal visual inspection of the device prior to connecting it.

1.2.- TRANSPORT AND HANDLING

To move the device a short distance, the device's floor support profiles facilitate handling with a pallet
jack or forklift. (
80
- Instruction manual
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or CIRCUTOR's after-sales service.
The transport, loading and unloading and handling of the device must be carried
out with proper precautions and using the proper manual and mechanical tools so
as not to damage it.
If the device is not to be immediately installed, it must be stored at a location with
a firm and level floor, and the storage conditions listed in the technical features
section must be observed. In this case, it is recommended that the device be stored
with its original protective packaging.
)
Figure 1
Figure 1: Transport with pallet jack.
The centre of gravity of some devices may be found at a considerable height. There-
fore, when handling with a forklift, it is recommended that the device be securely
fastened and that no abrupt manoeuvres made. The device should not be lifted
more than 20 cm off the ground
SVGm IP54
Instruction Manual