Medium Voltage - Circutor SVGm IP54 Manual De Instrucciones

SVGm IP54
● Invert
This parameter is used to select the phase whose static generator is going to switch the current direc-
tion of the load measurement transformer, so installation faults may be corrected.
Press the key to save the modified settings.

7.7.- MEDIUM VOLTAGE

The reactive current in medium voltage can be compensated with the device connected in low voltage.
This requires using a low voltage to medium voltage step-up transformer, which can be one already
present in the installation or one used solely for this purpose.
This screen, , is used to set up the type of transformer and its transformation ratio.
Figure 52
Activate the Medium Voltage option ☑ so the device can compensate for reactive current.
● Type Transf, select the type of step-up transformer, as indicated on its rating plate.
● Ratio, select the transformation ratio.
Range of values:
High voltage: 66000 ... 1000 V
Low Voltage: 1000 ... 100 V
Press the key to save the modified settings.
Instruction Manual
Figure 52: Configuration screen: Medium voltage.
125