Display - Circutor SVGm IP54 Manual De Instrucciones

SVGm IP54
Dynamic limitation of the device, one of the factors affecting the reliability of the device is the
stress caused by repeated heating and cooling cycles. The device adjusts both its ventilation and power
to minimise the impact that thermal cycling has on the life of the device.
Safety shutdown, despite the above measures, the temperature of certain components may exceed
their maximum allowable level if the device is used in environmental conditions beyond the specified
range. To avoid damaging the device or installation, the device will completely shut down automatically.
The device must be disconnected from its power supply for 30 minutes to rearm this protection

4.5.- DISPLAY

The device features a 7" TFT screen on the front that is used to display and set up all the parameters
of the internal modules.
Figure 23: Display.
The display enters the energy saving mode 10 minutes after the last action. To reactivate it, just touch
the display. The last screen before entering the energy saving mode will be shown.
Note: Each internal module of the static var generator has an independent display, whose operation is
explained in the manual " ".
SVGm (M248B01-03-xxx)
The display is divided into two areas ( ):
Figure 24
102
Instruction Manual