Ethernet Communications; Connection; Web Site - Circutor SVGm IP54 Manual De Instrucciones

SVGm IP54

9.- ETHERNET COMMUNICATIONS

For an installation with devices in parallel, the Ethernet connection can be made on any device.

9.1.- CONNECTION

The SVGm IP54 has an Ethernet port. This type of communication creates an intranet with IP commu-
nications.
To monitor the device remotely, the Ethernet communications cable must be connected to the front
screen ( ).
Figure 10
If the device that connects to this port is a computer, the network cable must be a crossover Ethernet
cable, as shown in
Figure 58

9.2.- WEB SITE

The device has a web site for viewing and configuring the parameters.
shows the main web server screen, from where you can access all of the information of the
Figure 59
SVGm IP54.
Instruction Manual
.
Figure 58: RJ-45 connector: Crossover Ethernet connection diagram.
Figure 59: Main screen of the web site.
133