Items Supplied, St 2500; Items Supplied, Sd 2500; Technical Data - Hilti ST 2500 Manual De Instrucciones Original

3.4 Items supplied, ST 2500

ST 2500
Power tool, ST­GT 17 depth gauge, operating instructions.

3.5 Items supplied, SD 2500

SD 2500
Power tool, depth gauge, belt hook, S-BHP 75 M bit holder, S-B PH2 bit and operating instructions.

4 Technical data

4.1 Technical data
Note
If the tool is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the power tool. The operating
voltage of the transformer or generator must always be within +5 % and -15 % of the rated voltage of
the power tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. See the power tool's type identification plate
for details of its voltage, frequency, current and input power ratings.
Rated power input
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Sound power level (L
pA
Sound pressure level (L
Uncertainty
Vibration information
Triaxial vibration values
Uncertainty (K)
Printed: 09.11.2016 | Doc-Nr: PUB / 5070743 / 000 / 03
)
)
wA
ST 2500 SD 2500
600 W 600 W
1.5 kg 1.6 kg
0 /min ...
2,200 /min
19 Nm 19 Nm
/ " hex socket / " hex socket
1 1
4 4
positive lock friction lock
II II
ST 2500 SD 2500
84 dB 84 dB
95 dB 95 dB
3 dB 3 dB
ST 2500 SD 2500
2.5 m/s² 2.5 m/s²
1.5 m/s² 1.5 m/s²
0 /min ...
2,200 /min
English 13