Intended Use; Items Supplied; Technical Data - Hilti SD 2500 Manual Del Usuario

Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may give you an electric shock if you damage an electric cable
accidentally.
Careful handling and use of power tools
▶ Secure the workpiece. A workpiece clamped in a vice or secured by some other clamping device is more
secure than when held only by hand.
▶ Switch the power tool off if the accessory tool sticks and stalls. The power tool may be deflected laterally.
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Overview of the product
Chuck
@
Power tool / accessory interface (snap-on
;
connection)
Universal hook
=
Motor cooling air intake
%
Grip
&
Air exit
(
Forward / reverse selector switch with
)
safety lock

3.2 Intended use

The product described is a hand-held mains-powered electric tool for use in drywall installation.
The power tool is designed for driving and removing screws in drywall installation work. Drywall screws with
a length of up to 55 mm and a diameter of up to 4.2 mm can be used.
Working with materials hazardous to health (e.g. asbestos) is not permissible.

3.3 Items supplied

Drywall screwdriver, operating instructions
Note
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.

4 Technical data

4.1 Technical data
Rated current input
Weight
Rated speed under no
load
Max. torque
Socket/bit drive
4 English
Printed: 20.04.2017 | Doc-Nr: PUB / 5135889 / 000 / 01 Printed: 20.04.2017 | Doc-Nr: PUB / 5135889 / 000 / 02
1
SD 4500
6.5 A
1.4 kg
(3.1 lb)
0 /min ... 4,500 /min
(0 Hz ... 75.0 Hz)
9.5 Nm
(7.0 ftlb )
f
Hex socket / "
1
4
Control switch (with electronic speed
+
control)
Lockbutton for continuous operation
§
Belt hook
/
Charge state and fault display (Li-ion
:
battery)
Battery release buttons
∙
Depth gauge
$
SD 2500
6.5 A
1.4 kg
(3.1 lb)
0 /min ... 4,500 /min
(0 Hz ... 75.0 Hz)
9.5 Nm
(7.0 ftlb )
f
Hex socket
1
/ "
4