Send Data Using Bluetooth Connectivity; Pair Devices - Nokia N93-1 Guia Del Usuario

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time.
For example, if you are connected to a headset, you can
also transfer files to another compatible device at the
same time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item and
Devices with Bluetooth technology within range start
to appear on the display.
Device icons are:
or video device, and
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices," p. 80.
80
Options > Send > Via Bluetooth.
computer, phone, audio
other device.
5 When the connection has been established,
data is shown.
The Sent folder in Messag.
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address).
To find the unique address of your device, enter
the code *#2820# in the standby mode.

Pair devices

To open the paired devices view (
application main view, press
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by
Sending
does not store messages sent
), in the Bluetooth
.
Options > New paired device.
in the device search.