Nokia N93-1 Guia Del Usuario página 100

WEP key settings—Enter WEP encryption
key), WEP key format (ASCII
key (the WEP key data in the selected format).
Security settings for 802.1x
WPA mode—Select the means of authentication:
to use an extensible authentication protocol (EAP) plug-in,
or Pre-shared key to use a password. Complete the
appropriate settings:
EAP plug-in settings (only for EAP)—Enter the settings
as your service provider instructs.
Pre-shared key (only for Pre-shared
The same password must be entered on the wireless LAN
access point device.
TKIP encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options > Advanced settings
IPv4 settings: Phone IP address
device), Subnet mask (the subnet IP address),
gateway (the gateway), and
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic,
Well-known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select
(length of the
or Hexadecimal), and WEP
and WPA/WPA2:
EAP
key)—Enter a password.
and from the following:
(the IP address of your
Default
DNS address—Enter the IP
User defined.
Proxy serv. address—Enter the address for the proxy server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using
a packet data connection.
Packet data conn.—If you select
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data connection.
If you select When needed, the device uses a packet data
connection only if you start an application or action that
needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
Wireless LAN
Show availability—Select whether
a wireless LAN is available.
Scan for networks—If you set
select how often the device searches for available wireless
LANs and updates the indicator.
To view advanced settings, select
settings. Changing wireless LAN advanced settings is
not recommended.
When available and you
is displayed when
Show availability to Yes,
Options > Advanced
99