Nokia N93-1 Guia Del Usuario página 102

Personal identification number (PIN) code—This code protects
your SIM card against unauthorized use. The PIN code (4 to
8 digits) is usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code is blocked,
and you need the PUK code to unblock it.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5 digits)
can be used to lock the device to avoid unauthorized use.
The factory setting for the lock code is 12345. To avoid
unauthorized use of your device, change the lock code.
Keep the new code secret and in a safe place separate
from your device. If you forget the code, contact your
service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certif. management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk
of viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security.
The existence of a certificate does not offer any
protection by itself; the certificate manager must
contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have
a restricted lifetime. If
Certificate not valid yet
certificate should be valid, check that the current
date and time in your device are correct.
Expired certificate or
is shown even if the
101