Enhancement Settings; Tv Configuration; Voice Commands - Nokia N93-1 Guia Del Usuario

Glossary: A roaming agreement is an agreement
between two or more network service providers
to enable the users of one service provider to use
the services of other service providers.
Cell info display—Select
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.

Enhancement settings

In the standby mode,
is connected, and
a Bluetooth connection to a headset is lost.
a compatible loopset is connected and
is connected.
Select Headset, Loopset, TTY,
Music stand, or
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See "Profiles—set tones," p. 92.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the ringing
type is set to Beep once
is disabled. Automatic answer is not available for TTY.
104
On to set the device to indicate
indicates a compatible headset
that the headset is unavailable, or
Bluetooth handsfree,
Car kit and from the following:
or Silent, automatic answer
Lights (for music stand and car kit)—Set whether lights
remain on, or are switched off after the time-out.
If you are using a TTY, you must activate it on your device.
Press , and select
TTY > Use TTY

TV configuration

Press , and select
following:
TV system—Select
format or NTSC
Ratio—Select

Voice commands

indicates
that a TTY
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see "Voice dialing," p. 53.
To activate enhanced voice commands for starting
applications and profiles, you must open the
application and its
Tools > Voice cm.
for the applications and profiles. To use enhanced voice
commands, press and hold
say a voice command. The voice command is the name
of the application or profile displayed in the list.
Tools > Settings > Enhancement
> Yes.
Tools > TV out. Select from the
PAL for PAL and SECAM TV system
for NTSC TV system format.
4:3 or 16:9.
Profiles folder. Press
> Profiles; the device creates voice tags
in the standby mode, and
>
Voice cm.
, and select