Checking The Consignment - Siemens SITRANS P500 Instrucciones De Operación

Ocultar thumbs Ver también para SITRANS P500:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
1.2
History
This history establishes the correlation between the current documentation and the valid firmware of the device.
The documentation for this edition is applicable for the following firmware:
Edition
Firmware and hardware
identity nameplate
12/2014
FW: 35.02.02
FW: 35.03.00
HW: 11.01.01
1.3
Purpose
Overview
Depending on the variant, the pressure transmitter measures corrosive, non-corrosive and hazardous gases, vapors and
liquids.
With appropriate configuration, you can also use the differential pressure transmitter for the following measurement types:
● Level
● Volume
● Mass
● Volume flow
● Mass flow rate
The output signal is always a load-independent direct current between 4 and 20 mA upon which a HART protocol is
superimposed.
You can install the "Intrinsically safe" or "Flameproof enclosure" version of the transmitter in hazardous areas. The devices
have an EC type-examination certificate and meet the regulations applicable to them, for example, the harmonized
CENELEC standards in Europe.
Transmitters with remote seals of different shapes can be delivered for special applications. For example, measuring high-
viscosity substances is a special application.
Operate the device in accordance with the specifications in section Technical data (Page 27).
For additional information, please refer to the operating instructions for the device.
1.4

Checking the consignment

1. Check the packaging and the device for visible damage caused by inappropriate handling during shipping.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
Do not use damaged or incomplete devices.
4
System integration
SIMATIC PDM 8.x
Installation path for
PDM
SITRANS P500
Note
SITRANS P500 with HART
A5E02344532-04, 12/2014
Tabla de contenido
loading

Tabla de contenido