Content Of The Packaging; Removing The Appliance - ResMed Narval CC Manual De Instrucciones

Content of the packaging

Your Narval appliance comprises the following components:
1. Lower splint
2. Upper splint
3. Connecting rods
2
1
Your Narval appliance is delivered with the following items:
1. A storage container
2. A denture cleaning brush
3. Instructions for use - not shown
4. Elastic bands (optional) - not shown
5. A connecting rod kit to allow the dental clinician to adjust
the mandibular advancement - not shown
1
2
4 ENGLISH
Fitting the appliance
1
To make it easier, the following steps may be performed in front of a
3
mirror the first few times you position your Narval appliance:
1. Moisten your Narval appliance with water.
2. Position your Narval appliance in your mouth with the upper splint
3. Press firmly with your fingers on the splint until it is securely in place.
4. Bring the lower jaw forward and proceed in a similar way to slide in the
Do not bite into the splint to insert it onto the teeth. In some cases it may
be easier to insert the lower splint first.

Removing the appliance

1
1. Use your fingers evenly on each side of the lower splint to gently
2. Repeat step one with the upper splint.
3. Remove your Narval appliance from your mouth.
4. Clean your Narval appliance according to the cleaning instructions from
2
(smaller one) against your upper teeth.
Do not pull or press on the connectors to adjust the position.
lower splint.
2
lift it away from your gums. Ensure you do not pull or press on the
connecting rods.
the Cleaning section.
3 4
3 4