Bartscher E 5230 Manual De Instrucciones página 76

Programming and saving cooking / baking programmes
D 4
T 11
- 72 -
The device's memory has a capacity of 99
programmes for cooking / baking, which you
can save and use later.
To turn the device on, press button
T 2 – T 3 - T 4
buttons
T 1
is ready for input. The LED display
"MANUAL".
Individual parameters are set depending on the
type of food product being prepared:
cooking / baking mode,
temperature or cooking ∆T,
time or internal temperature,
fan speed,
moisturising.
After preparing the desired programme, press and
hold for several seconds button
D 4
display
programme in memory (e.g. if 3 programmes are
already saved in pos. 1, 2 and 3, the first free
place in memory will display as "PRG 04").
Press and hold for several seconds button
until the LED display
T 12
Each programme (recipe) can include up to
9 cooking phases plus pre-heating.
To program individual cooking phases press
T 11
button
T 16
The LED display
the cooking phase "STEP 1". Set the
parameters for this cooking phase. Press and
hold for several seconds button
M
LED display
To program the next cooking phase, turn dial
to the right. The LED display
new cooking phase: "STEP 2". Parameters for
the new cooking phase can now be entered.
will flash, and the device
will show the number of the first free
D 4
reads "MEM".
.
D 4
will show the number of
D 4
reads "MEM".
D 4
T1
. Function
D 4
will read
T 12
.The LED
T 12
T 12,
until the
M
will display the