Scubapro Aladin 2G Manual De Usuario página 139

Setting the backlight duration
1. Confirm that you wish to change the
duration of the backlight illumination by
pushing
2. Change the duration with
or push on / push off)
3. Confirm it with
Switching the audible attention signals
on and off
With this option you can switch off the
audible attention signals only (the audible
alarms remain active). Refer to page 20 to
see this distinction.
1. Confirm that you wish to change the
setting of the audible attention signals
by pushing
flash.
2. Switch between "on" or "off" by press-
ing .
3. Confirm the setting with
SCUBAPRO ALADIN 2G
. The value starts to flash.
. (2-12s
.
. "On" or "off" starts to
.
Switching the water contacts on and
off
On submerging in water the water contacts
switch on Aladin 2G automatically.
WARNING
If you chose the option "Water contacts
off", Aladin 2G will turn on with a delay of
up to 1 minute into the dive. This will affect
functioning of the computer.
Make sure that the computer is on before
starting the dive.
1. Confirm that you wish to change the
setting of the water contacts by pushing
. "On" or "off" starts to flash.
2. Switch between "on" or "off" by press-
ing .
3. Confirm the setting with
11. Settings
.
61