Dive Planner; Planning A No-Stop Dive - Scubapro Aladin 2G Manual De Usuario

9. Dive planner

9. DIVE PLANNER
Aladin 2G has a dive planner which
allows the planning of no-stop dives and
decompression dives.
Basis of the planning:
• selected fraction of oxygen and MOD
• selected water type
• selected MB level
• water temperature of the most recent
dive
• altitude range (if any)
• status of saturation at the time the dive
planner is selected
Select dive planner
or
until PLn
if
Enter the dive
planner
if rep. dive
No-stop time or
MB no-stop time
DEPTH DEPTH DIVE TIME
NO STOP
CNS O %
2
CNS O
2
Set desired depth
( and
Icon for MB level L1-L5
54
The no-dive warning and its duration are displayed
if Aladin 2G detects an increased risk due to the
accumulation of microbubbles.
NO
Dive planner symbol
CNS O %
2
Enter the dive planner with
The input window for the time interval is displayed if there
was a remaining desaturation (DESAT) before the dive
planner has been selected. This surface interval between
now and the beginning of the dive can be changed with
and
the CNS O % value and the altitude section to which you
2
may not rise at the end of the selected surface interval.
%
If the no-dive warning and its duration has been
displayed, Aladin 2G proposes this time – rounded
up to the next 15 minutes – as surface interval. If
)
the proposed interval is shortened, the no-dive
warning appears.
• assuming a normal workload of the
diver and observance of the prescribed
ascent rates
• assumption: the change to gas d
is performed at the selected MOD of
gas d.
9.1

Planning a no-stop dive

To select the dive planner Aladin 2G must
be in user mode (time of day display).
Push or until the symbol for the
dive planner PLn appears. (The dive planner
cannot be selected in gauge mode.)
No-dive warning
(Do Not Dive)
Duration of the warning
Input of the surface interval by
pushing /
.
in steps of 15 minutes. Aladin 2G displays
SCUBAPRO ALADIN 2G