Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PROBLEM
TOP BURNERS DO NOT
LIGHT OR DO NOT
BURN EVENLY
BURNER FLAMES VERY
LARGE OR YELLOW
SURFACE BURNERS
LIGHT BUT OVEN
DOES NOT
CONTROL SIGNALS
:
AFTER ENTERING
COOKING TIME OR
START TIME :
:
DISPLAY FLASHES
UNABLE TO GET THE
DISPLAY TO SHOW "SF"
FAN NOISE
: :
POSSIBLE
CAUSE
•
Make sure electrical plug is plugged into a live power outlet,
•
Burner holes on the side or around the top of burner may be clogged. Remove
burner heads and burner caps. and clean them with a sewing needle or bare wire
Make sure you do not enlarge the burner holes, Check electrode area for burned-on
food or grease
•
Make sure drip pans are installed correctly.
•
If range is connected to LP gas, contact the person who installed your range
or made the conversion.
• The oven gas shut-off valve may have accidentally been moved during
cleaning or moving.
To check the oven gas shut-off valve, remove the storage drawer and look
for the gas shut-off lever at the back of the range_
\ closed.
PULL
/
i o You forgot to enter a bake temperature or cleaning time. Press the BAKE pad
and desired temperature or the SELF CLEAN pad and desired clean time.
:
i
° Power outage occurred, Reset the CLOCK. See the Using the Clock and Timer section.
° The oven control pads were not pressed properly. The BAKE and BROIL HI/LO pads
must be pressed at the same time and held for 3 seconds.
• A cooling fan may automatically turn on and off to cool internal parts_ This is normal.
47
Tabla de contenido
