Hilti SI­-AT-­A22 Manual De Instrucciones Original página 25

Malfunction
The symbols indicat-
ing "Hardware fault"
are displayed.
The symbol indicat-
ing "Documenta-
tion function deacti-
vated" is displayed.
The symbols indicat-
ing "...% of memory
is in use" are dis-
played. (The appears
when the value is
≥ 90 %.)
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Printed: 15.09.2017 | Doc-Nr: PUB / 5331558 / 000 / 01
Possible cause
A device error has been
detected.
Documentation function
deactivated (warning
only).
Usage of data memory
in the torque module
is indicated in percent.
Note: When 100 % is
reached, the oldest data
will be overwritten!
Action to be taken
▶ Connect the torque
module to a PC.
▶ Use the
AT Documentation
Software program
to read the fault
memory and follow
the troubleshooting
instructions issued by
the program.
▶ If you need the doc-
umentation function,
connect the torque
module to the PC and
activate the documen-
tation function in the
AT Documentation
Software program.
▶ If necessary, press the
OK button to hide the
message and continue
the starting process
for the torque module.
▶ Connect the torque
module to a PC.
▶ Use the
AT Documentation
Software program to
export the data to a
report.
▶ Then delete the data
from the torque mod-
ule's memory to free
up storage space.
English 19