Setting The Operating Mode; Setting The Operating Mode With The Control Panel Buttons - Hilti SI-AT-A22 Manual De Instrucciones Original
Ocultar thumbs
Ver también para SI-AT-A22:
- Manual de instrucciones original (352 páginas) ,
- Manual de instrucciones (65 páginas) ,
- Manual del usuario (33 páginas)
Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.7 Setting the operating mode
There are 2 ways of setting the operating mode to suit the type of threaded
fastener:
• Scan the corresponding barcode or QR code
• Manual adjustment using the buttons on the torque module
Scanning the barcode or QR code
If a barcode or a QR code is available for the Hilti product to be tightened,
the operating mode can be set correctly for the product quickly and easily
by scanning the code.
▶ Set the operating mode by scanning the barcode or QR code. → page 12
Manual adjustment
If no barcode or QR code is available for the product to be tightened, the
operating mode can be set by using the buttons on the torque module.
Note
The "Unregulated" operating mode can be set only manually.
▶ Select the operating mode with the control panel buttons. → page 12
5.7.1 Setting the operating mode with the control panel buttons
1. Unlock the torque module. → page 6
2. Use the arrow buttons to move the selection frame, as necessary, to the
option you want to change.
3. Press the OK button.
◁ A black background appears behind the option you selected.
4. Use the arrow buttons to select the desired setting.
5. Press the OK button.
◁ The selected setting appears in the selection frame.
6. Repeat the last 3 steps as necessary to make other changes.
7. Lock the torque module. → page 6
5.7.2 Setting the operating mode by scanning the barcode or QR
code
5
1. Unlock the torque module. → page 6
2. Press the "Scan" button.
◁ The scanner is activated and the
indicate that the scanner is ready.
3. Hold the module facing the barcode or QR code at a distance of
approx. 15 centimeters (6"), so that the code is inside the frame projected
by the scanner.
◁ The LEDs show green.
◁ The confirmation tone sounds.
◁ The operating mode for the product to be tightened appears on the
display.
12
English
Printed: 15.09.2017 | Doc-Nr: PUB / 5331558 / 000 / 01
symbol appears on the display to
Tabla de contenido
